|
|
Production of joint folded out the rule
Šoukal, Hynek ; Podaný, Kamil (referee) ; Žák, Ladislav (advisor)
Project developed within the bachelor study presents a proposal production technology of joint folded out the rule from construction steel 12 060. Thick is 0,5 mm and the production ran is specify at 30 000 units a year. In accordance with literature studies and by calculations have been designed a combined roll forming tool, which consists of a rack with two pillars. This tool will be fix in on eccentric press LEN 10C by SMERAL, Trnava, with nominal press force 100 kN. Trimming punches, holding punch and bending puch are made of tool steel, grade 19 436.3. Lower functional part of the tool ass well.
|
|
|
Forging oblong forgings
Chudý, Jan ; Štroner, Marek (referee) ; Lidmila, Zdeněk (advisor)
This bachelor´s thesis is focused on design of technological production procedure of front wheel-drive arm of agricultural machine. Material for construction of this part is unalloyed steel 12 060. Part of this thesis is literall study focused on forging. On basis of this study is designed required forged piece, which will be processed by swaging on hammer KHZ 4A. After swaging is needed removal of excess material in form of burr and stencil with trim pressing machine LKOA 200. Swadge is made of alloyed tool steel 19 662. Part of thesis is mechanical drawing documentation and technical-economical assessment.
|
|
|
Forging oblong forgings
Příkaský, Jakub ; Štroner, Marek (referee) ; Lidmila, Zdeněk (advisor)
The project deals with the design of the production of a rod-shaped component using a die swage. The material is steel 12 060. Based on a literature study on forging and calculations, the forging, the technological process and the hammer die were designed. Based on the calculated work required, the power hammer KHZ 2 was designed. Technical and economic evaluation was performed.
|
|
|
Forging oblong forgings
Chudý, Jan ; Štroner, Marek (referee) ; Lidmila, Zdeněk (advisor)
This bachelor´s thesis is focused on design of technological production procedure of front wheel-drive arm of agricultural machine. Material for construction of this part is unalloyed steel 12 060. Part of this thesis is literall study focused on forging. On basis of this study is designed required forged piece, which will be processed by swaging on hammer KHZ 4A. After swaging is needed removal of excess material in form of burr and stencil with trim pressing machine LKOA 200. Swadge is made of alloyed tool steel 19 662. Part of thesis is mechanical drawing documentation and technical-economical assessment.
|
|
|
Forging oblong forgings
Příkaský, Jakub ; Štroner, Marek (referee) ; Lidmila, Zdeněk (advisor)
The project deals with the design of the production of a rod-shaped component using a die swage. The material is steel 12 060. Based on a literature study on forging and calculations, the forging, the technological process and the hammer die were designed. Based on the calculated work required, the power hammer KHZ 2 was designed. Technical and economic evaluation was performed.
|
|
|
Production of joint folded out the rule
Šoukal, Hynek ; Podaný, Kamil (referee) ; Žák, Ladislav (advisor)
Project developed within the bachelor study presents a proposal production technology of joint folded out the rule from construction steel 12 060. Thick is 0,5 mm and the production ran is specify at 30 000 units a year. In accordance with literature studies and by calculations have been designed a combined roll forming tool, which consists of a rack with two pillars. This tool will be fix in on eccentric press LEN 10C by SMERAL, Trnava, with nominal press force 100 kN. Trimming punches, holding punch and bending puch are made of tool steel, grade 19 436.3. Lower functional part of the tool ass well.
|
guest ::
